Deluxe cargo box (TX 4X2 shown)
Deluxe cargo box, tailgate lowered (TX 4X2 shown)
The deluxe cargo box side panels and tailgate consist of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise. The cargo box floor and load guard (front panel) are made of steel.
Deluxe cargo box tailgate
Tailgate lowered to 150 degrees
The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate features a truck-like latch, and can be operated with one hand.
The standard installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.
Deluxe cargo box tilt
Integrated handle (B) and latch (A)
Gas assist (C) and prop rod (D)
The deluxe cargo box is easier to latch (A), unlatch, raise, and lower with the integrated handle design (B) and gas assist (C).
A prop rod (D) is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.
Integrated tie-down points
Integrated tie-down point in cargo box bed
Additional tie-down points on cargo box
The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:
- Four corners inside the cargo box bed
- Four points on the load guard directly behind the operator station (A)
- Tie-down bars on either side of the cargo box (B)
- Six points on the underside of the cargo box frame (circled)
Converting deluxe cargo box to a flat bed
Deluxe cargo box converted to a flat bed
The deluxe cargo box easily converts to a flat bed by removing ten bolts and unplugging rear lights (if equipped) at the harness pigtail at the rear of the machine. The flatbed configuration allows loading irregularly shaped cargo.
Brake and taillight
Bedmat—protects the steel floor from dents
Optional accessories for the deluxe cargo box include:
- Factory-installed brake and taillight
- Brake and taillight only (for back-up lights, flashers and turn signals, order deluxe light kit)
- Factory-installed spray-in liner (not shown)
- Improves skid resistance and surface abrasion protection
- Cargo box bed mat
- Cargo box power lift (not shown)
NOTE: Optional factory-installed cargo box bed mat and power lift are not available in AU/NZ
465 cu L
(16.4 cu ft)
TH 6X4 gas
454 kg (1000 lb)
TH 6X4 diesel
550 kg (1200 lb)
Box dump angles (degrees)
43 degrees +/-1
43 degrees +/-1
Cargo box load height
63.5 cm (25 in.)
The cargo box load height allows for easy loading and unloading.
CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.